Just increase the quantity to correspond to as many feet you require for your draft beer system. Its that easy!
When purchased by the foot, you will receive 1 complete Length ( ex. when purchase 5 ft. receive ( 1 ) 5 ft. Length)
Remember to order your clamps and hex nuts as required.
3/16" I.D. vinyl tubing is used for the beer hose in most applications where the distance between the keg and the faucet is less than 5’. The small I.D. (inside diameter) provides the correct restriction to the beer flow balancing against the pressure applied to the keg.
What are the restriction?
This size hose is not appropriate for use in lengths longer then 5' as a higher then normal keg pressure would be required to dispense the beer and this would result in over carbonated (foamy) beer.
This brewery approved hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals.
Economically priced by the foot so you can order as little or as much as you need. Also available in 50' coils, 100' spools, or 500' spools.
Clamps SNP-6 / 705W / 1314 / 133SL
Length: Priced per Foot
Max Temperature: 140 degrees
Restrictions: 3 Lbs. per Foot
Liquid Content: 1/6 oz per foot