Home :: Co2 Regulators

Co2 Regulators

Primary Single Gauge - Co2
Double Gauge - CO2 Primary
Primary Single Gauge - Co2

•Forged brass and die cast for durability.
• Quad-Ring inlet seal at tank connection.
• Set screw pressure adjustment.
• Flow control inlet nipple filter.
• CO2 tank mount (CGA-320 threads).
• 0-60 PSI, for accurate keg pressure
• 3/8" O.D. (To fit 5/16" I.D. Gas Hose)
• For safety: pressure relief valve releases at 55-65 PSI
$47.95

Double Gauge - CO2 Primary

• Forged brass and die cast for durability.
• Quad-Ring inlet seal at tank connection.
• Set screw pressure adjustment.
• Flow control inlet nipple filter.
• CO2 tank mount (CGA-320 threads) .
• 0-60 PSI, for accurate keg pressure
• 3/8" O.D. (To fit 5/16" I.D. Gas Hose)
• For safety: pressure relief valve releases at 55-65 PSI
$53.95

Double Gauge - CO2 Primary - 2 Kegs
CO2 Aluminum Cylinder - 5 lb.
Double Gauge - CO2 Primary - 2 Kegs

•2 shut-offs for 2 keg dispensing!
•Forged brass and die cast for durability.
•Quad-Ring inlet seal at tank connection.
•Set screw pressure adjustment.
•Flow control inlet nipple filter
•1 Pressure / 2 Kegs
•0-60 PSI, for accurate keg pressure
•3/8" O.D. (To fit 5/16" I.D. Gas Hose)
•For safety: pressure relief valve releases at 55-65 PSI
$59.95

CO2 Aluminum Cylinder - 5 lb.

Material: Aluminum Capacity: 5 lbs. Diameter: 5-1/4" Height: 17-1/2" Weight (Empty): 7-1/2 Lbs. (Intended for use with a CO2 Regulator)
$99.95

CO2 Steel Cylinder - 2-1/2 lb.
CO2 Aluminum Cylinder - 10 lbs.
CO2 Steel Cylinder - 2-1/2 lb.

Material: Steel Capacity: 2-1/2 lbs. Diameter: 3-1/2" Height: 18-1/4" Weight (Empty): 6-1/2 lbs. (Intended for use with a CO2 Regulator)

Notes: Round bottom, will not stand upright without support.
$119.95

CO2 Aluminum Cylinder - 10 lbs.

Material Aluminum Capacity 10 lbs. Diameter: 6-7/8" Height: 20" Weight (Empty): 15 Lbs. (Intended for use with a CO2 Regulator)
$129.95

4 pressure CO2 Regulator
4 pressure CO2 Regulator

Features:

Forged brass and die cast for durability. Set screw pressure adjustment.

Specifications: Type: Secondary Regulator - CO2 or Mixed Gas Installation: Wall mount bracket Dimensions: 11" wide x 7-1/4" high x 5-1/2" deep Performance: 4 Pressure / 4 Products Output Pressure Gauge: 0-60 PSI, for accurate keg pressure Outlet Barb: 3/8" O.D. with shut-off
$197.95


HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Co2 Regulators